Chimney adapter (reducer)
code: PARIZ
manufacturer: AKVILON
In stock
Insulated Chimney Reducer / Adapter
Description and Purpose
The Insulated Reducer is a cone-shaped element of the Izokompakt system designed for the airtight connection of two sections of sandwich chimney pipes with different diameters. Structurally, it completely replicates the pipe structure (inner liner, 50 mm insulation, outer casing), which eliminates the appearance of "thermal bridges" at the junction.
Main Application:
Increasing the chimney diameter. For example, if the boiler outlet is 150 mm, but a main stack of 180 mm is required for good draft, this adapter is installed.
Key Advantages
- Aerodynamics: The smooth conical shape without sharp steps minimizes gas flow turbulence. This helps maintain stable draft when changing the channel cross-section.
- Thermal Insulation: The reducer is a fully insulated element. A 50 mm layer of basalt wool guarantees fire safety and the absence of condensation in this section.
- Aesthetics: The outer casing can be made of stainless steel or galvanized steel, as well as powder-coated (RAL) to perfectly match the color of the main chimney.
- Correct Joint: The element is assembled according to the "condensate flow" principle, preventing moisture from entering the insulation.
Technical Specifications
The reducer is manufactured for the specific dimensions of your system. When ordering, please specify the lower diameter (input) and upper diameter (output).
| Product type | Symmetric Reducer (Conical adapter) |
| Inner pipe material | Stainless steel AISI 304L / 316L |
| Outer casing material | Galvanized / Stainless / Painted steel (RAL) |
| Insulation | 50 mm (Basalt wool 100 kg/m³) |
| Compatibility | All diameters of the Izokompakt system |
Important Installation and Safety Rules
- No Narrowing: According to building codes, the chimney diameter must not be smaller than the diameter of the heating appliance outlet. Therefore, this adapter is used primarily as an increaser. Using it to reduce the diameter is permissible only if there is a precise engineering calculation.
- Fixation: Since the adapter connects different pipes, both joints (upper and lower) must be secured with Locking Bands of the corresponding diameters.
Delivery
- Pickup at our store (warehouse) ( AKVILON, Mazā Rencēnu 6, Rīga )
- Venipak (delivery 4.50 €. Free delivery above 100.00 €)
- courier
Payment
- Payment upon receiving the order in our store (by card or in cash)
- Bank transfer upon automatically issued invoice
- creditcard, Swedbank, SEB, Citadele, Luminor
Only registered customers who have made a successful purchase can add a review. Log in
Similar products
Insulated tee 90° with opposite revision and adapter - 100/200
code: dnapnt9010
AKVILON
production 2-7 working days
Insulated Chimney Inspection Tee 90° with Cap - 100/200
code: dnatn0010
AKVILON
production 2-7 working days
Insulated Chimney Inspection Tee with Rectangular Door - D-100/200
code: DNATND0010
AKVILON
production 2-7 working days
Insulated Chimney Condensate Drain with Side Outlet - D-100/200
code: dnaks0010
AKVILON
production 2-7 working days
Insulated bend 90° with inspection door - D-100/200
code: dnalr9010
AKVILON
production 2-7 working days
Insulated Chimney Roof Flashing 35°-50° - D-100/200
code: dn1ji5010
AKVILON
production 2-7 working days
Insulated Chimney Terminal with Rain Cap - D-100/200
code: dnanzj0010
AKVILON
production 2-7 working days
Rafter / Ceiling Support Bracket 1000 mm - D-225/L-1000
code: DN1DMP1013100
AKVILON
production 2-7 working days
Rigid Roof Bracing Kit 1500 mm - D-200/L-1500
code: DN1DMC0120015
AKVILON
production 2-7 working days
Rigid Roof Bracing Kit 2000 mm - D-200/L-2000
code: DN1DMC0120020
AKVILON
production 2-7 working days
Rigid Roof Bracing Kit 3000 mm - D-200/L-3000
code: DN1DMC0120030
AKVILON
production 2-7 working days