Chimney damper mechanism with long handle is a chimney element used for draught control by partially blocking the flow of gases in the chimney. It can withstand a temperature load of 1200 ˚C.

Black pipes and joints are characterised by very fast assembly and high strength. They are rolled on special factory equipment - on one side the landing place is smaller in size, on the other side is larger, which allows assembling the chimney using the ‘one-in-one’ method. The seam is welded by laser welding, which provides reliability, beautiful aesthetic appearance and convenience in further maintenance. The inner surface is smooth, which does not allow a large amount of soot to accumulate on the walls of the chimney.
After finishing, black heat-resistant paint ‘Senotherm’ is applied to the products. This paint does not smoke when first burning, does not emit an unpleasant odour and due to these properties is used by most fireplace manufacturers.

Black pipes and connections are installed indoors before entering the flue duct or chimney shaft. If installed outdoors, the chimney should be insulated.

The products shown in the photos may differ slightly from those offered for sale (photos are for illustrative purposes).

Manufacturer: PRODMAX

Material: 2 mm thick steel sheet, painted with heat-resistant paint

Diameter range: 180-200 мм

Certificate: All products are certified and comply with European standards, have CE certificate in accordance with EN-1856-2.