Adjustable Wall Bracket 250-350 mm
€3006Without VAT 24.84 €
Choose a size
Price includes VAT 21%.
The indicated price is valid ordering till 20.01.2026.
The indicated price is valid ordering till 20.01.2026.
Insulated Chimney Adjustable Wall Bracket 250-350 mm
Description and Purpose
The adjustable wall bracket with a stand-off range of 250–350 mm is designed to securely fix the chimney to the building wall. It is used when the pipe requires a significant offset from the facade (for example, to bypass wide roof overhangs or architectural elements).
The design features a screw mechanism (threaded rods) that allows for precise adjustment of the distance from 25 to 35 cm, ensuring the chimney remains strictly vertical despite wall irregularities.
Key Advantages
- Load-bearing function: This bracket features a rigid welded construction made of steel profiles (EN-1090-2 standard). It is capable of supporting the vertical weight of the chimney stack, as well as resisting wind and snow loads. When using this bracket, a separate bottom base platform is not mandatory.
- Durability: Made of high-quality materials (Stainless Steel AISI 304 or Powder Coated S235), ensuring long service life and corrosion resistance.
- Flexibility: The adjustment range allows for perfect alignment even on uneven surfaces.
Technical Specifications
The bracket is selected based on the outer diameter of the chimney.
| Product type | Adjustable Wall Bracket |
| Adjustment range | 250 mm – 350 mm |
| Material options | AISI 304 or S235 |
| Profiles used | 20x20x1.5mm / 25x25x2.0mm / 30x30x2.0mm (depending on size) |
| Available diameters (outer) | 200, 225, 250, 280, 300 mm |
Other Distance Options
Select the model corresponding to the required offset from the wall:
- Distance 50 – 150 mm
- Distance 150 – 250 mm
- Distance 350 – 450 mm
- Distance 450 – 550 mm
- Distance 550 – 650 mm
Installation Recommendations
- Spacing: Brackets should be installed every 2 meters of chimney height. If the diameter or distance from the wall increases, the spacing should be reduced.
- Large offsets (>500mm): Note that for brackets with an extension greater than 500 mm (custom models), an additional support bracket at the base of the riser is recommended.
