Decorative cap (cover plate) for rectangular insulated flues - has a decorative function, intended for sealing a wall or ceiling opening (where an insulated flue is routed through a wall or ceiling).

Consists of 2 parts, which means that the plate can also be applied after the flue has been installed. Each side has an overlap of 10 mm, total overlap 20 mm. The diameter of the plate is 1-2 mm larger than the diameter of the pipe.

When it is not possible to make the end-plate at a slope (e.g. for installation on a loft ceiling), a special end-plate (with oval cut-out) must be ordered, in which case the customer must specify the slope of the ceiling when placing the order.

We also offer decorative universal square shut-off plates with adjustable angle (0°-30° ; 30°-45°), consisting of two parts, which can be installed after the flue installation.

In the T600 system, it is recommended to additionally create a ventilated air plenum in the soffit and ceiling assembly (for even cooling of the flue in the soffit assembly), this can be achieved using a ventilated cover plate (perforated cover plate).

Can be made to customer dimensions (larger than standard).

The IZOKOMPAKT insulated flue system is safe and convenient to use, and is certified, CE-marked and complies with the requirements of the current EU standard EN-1856-1.

Decorative end (cover) plate rectangular (standard)

Decorative plate angled (on request)

Decorative universal square end-plate with adjustable angle 0 - 30 grad.

Decorative universal square end-plate with adjustable angle 30 - 45 grad.

Manufacturer: SIA Akvilon

Materials and main characteristics:

• temperature class T=600°C or T=450°C 
• material: stainless steel AISI 430 BA polished, from 0.5 mm, longitudinal seam welded or industrial rolled
• material: DX51+Z275 galvanised steel, painted steel (PE, PUR. PURMAT), powder-coated

Diameter range (Dn): 200-900 mm

Certificate: CE, according to EN-1856-1