Insulated Chimney Roof Flashing 35°-50°
code: dn1ji5010
manufacturer: AKVILON
production 2-7 working days
€7224Without VAT 59.70 €
Choose a size
Price includes VAT 21%.
The indicated price is valid ordering till 12.09.2026.
The indicated price is valid ordering till 12.09.2026.
Insulated Chimney Roof Flashing 35°-50°
Description and Purpose
The Roof Flashing with a slope of 35°–50° is a waterproofing element designed to seal the chimney exit point through a pitched roof with a steep slope.
This model features a cone welded at a sharp angle to the base. This allows the chimney to be installed strictly vertically even on roofs with a large height difference, ensuring proper water drainage and an aesthetic appearance.
Key Features
- For steep roofs: The geometry is specifically calculated for roofs with a strong incline, where standard flashings fail to ensure the verticality of the pipe.
- Leak protection: The extended cone length and wide base prevent water ingress even during strong winds and driving rain.
- System approach: This element does not seal the gap between the pipe and the cone by itself. For complete waterproofing, a storm collar is required.
Technical Specifications
| Product type | Roof Flashing |
| Roof slope | 35 – 50 degrees (Steep pitch) |
| Available diameters (mm) (inner / outer) |
100/200, 120/220, 130/225, 160/250, 180/280, 200/300 |
| Material | Stainless steel (Painted/Galvanized on request) |
| Compatibility | For Izokompakt insulated chimneys |
Important Installation Recommendations
- Joint sealing: The technological gap between the pipe and the cone must be covered from above by a storm collar, after sealing the joint with heat-resistant silicone. This is a mandatory condition to protect against moisture getting inside.
- Laying rule: To ensure natural water runoff, the top edge of the base must be tucked under the roofing material (closer to the ridge), and the bottom edge should be laid over the roofing.
Other Slope Options
If your roof pitch is different, select the corresponding variant:
Delivery
- Pickup at our store (warehouse) ( AKVILON, Mazā Rencēnu 6, Rīga )
- Venipak (delivery 4.50 €. Free delivery above 100.00 €)
- courier
Payment
- Payment upon receiving the order in our store (by card or in cash)
- Bank transfer upon automatically issued invoice
- creditcard, Swedbank, SEB, Citadele, Luminor
Only registered customers who have made a successful purchase can add a review. Log in
Similar products
Insulated tee 90° with opposite revision and adapter - 100/200
code: dnapnt9010
AKVILON
production 2-7 working days
Insulated Chimney Inspection Tee 90° with Cap - 100/200
code: dnatn0010
AKVILON
production 2-7 working days
Insulated Chimney Inspection Tee with Rectangular Door - D-100/200
code: DNATND0010
AKVILON
production 2-7 working days
Insulated Chimney Condensate Drain with Side Outlet - D-100/200
code: dnaks0010
AKVILON
production 2-7 working days
Insulated bend 90° with inspection door - D-100/200
code: dnalr9010
AKVILON
production 2-7 working days
Insulated Chimney Roof Flashing 35°-50° - D-100/200
code: dn1ji5010
AKVILON
production 2-7 working days
Insulated Chimney Terminal with Rain Cap - D-100/200
code: dnanzj0010
AKVILON
production 2-7 working days
Rafter / Ceiling Support Bracket 1000 mm - D-225/L-1000
code: DN1DMP1013100
AKVILON
production 2-7 working days
Rigid Roof Bracing Kit 1500 mm - D-200/L-1500
code: DN1DMC0120015
AKVILON
production 2-7 working days
Rigid Roof Bracing Kit 2000 mm - D-200/L-2000
code: DN1DMC0120020
AKVILON
production 2-7 working days
Rigid Roof Bracing Kit 3000 mm - D-200/L-3000
code: DN1DMC0120030
AKVILON
production 2-7 working days