Roof Flashing 0°-5°
€6741Without VAT 55.71 €
Choose a size
Price includes VAT 21%.
The indicated price is valid ordering till 20.01.2026.
The indicated price is valid ordering till 20.01.2026.
Insulated Chimney Roof Flashing 0°-5° (Flat Roof)
Description and Purpose
The Roof Flashing with a slope of 0°–5° is a waterproofing element designed to seal the chimney exit point through a flat or minimally sloped roof.
The element consists of a metal base plate with a cone welded to it. The cone facilitates the passage of the chimney pipe through the roof structure while maintaining its vertical position.
Key Features
- For flat roofs: The cone geometry is aligned strictly vertically relative to the base. This is the optimal solution for soft roofing, bitumen, or membrane roofs.
- Precipitation protection: The base covers the opening cut in the roof, protecting the under-roof space from rain and snow ingress.
- System approach: This element does not seal the gap between the pipe and the cone by itself. For complete waterproofing, a storm collar must be used.
Technical Specifications
| Product type | Roof Flashing |
| Roof slope | 0 – 5 degrees (Flat roof) |
| Available diameters (mm) (inner / outer) |
100/200, 120/220, 130/225, 160/250, 180/280, 200/300 |
| Material | Stainless steel (Painted/Galvanized on request) |
| Compatibility | For Izokompakt insulated chimneys |
Important Installation Recommendations
- Joint sealing: The flashing covers the hole in the roof, but a technological gap remains between the chimney pipe itself and the flashing cone (to allow for thermal expansion). This gap must be covered from above by a storm collar, and the joint sealed with heat-resistant silicone. Without the storm collar, water will leak into the building along the pipe wall.
- Roof integration: The flashing base is typically installed under the top layer of the roofing material (or bonded between bitumen layers) to ensure proper water runoff.
Other Slope Options
If your roof has a pitch, select the corresponding angle:
