Black Steel Chimneys for Stoves and Fireplaces
Black Steel Flue Pipes for Stoves and Fireplaces
Thick-walled black steel flue pipes are designed to connect wood-burning stoves, sauna heaters, fireplaces, and solid fuel boilers to the main chimney. These elements are installed indoors and serve as the starting section of the smoke exhaust system. They connect directly to the outlet of the heating appliance and provide a safe connection to a brick, ceramic, or insulated steel shaft.
All products are CE certified and comply with the European standard EN 1856-2. The elements are soot fire resistant (Class G) and designed for operating temperatures up to 600°C (T600 class). Products are constantly available in stock, allowing for the rapid assembly of a system of any configuration.
Our products in this category are divided into two lines: the standard series and the Ferro-Lux interior series.
Is this system right for you?
Before ordering, make sure that black steel chimneys are exactly what you need for your project:
- Yes, if you have a solid fuel appliance: You plan to connect a classic wood-burning stove, fireplace insert, sauna heater, or wood/briquette boiler.
- Yes, if you need a starting section indoors: The elements will be installed inside a heated room or boiler room (from the heating appliance to the entrance of the main chimney), and you want to use the residual heat to warm the room.
- No, if the chimney runs outdoors or passes through a wooden ceiling: For outdoor installation, passing through a cold attic, or combustible structures, insulated sandwich chimneys are required (e.g., our IZOKOMPAKT series). Otherwise, condensation will form, and the intense heat of the black pipe poses a fire hazard.
- No, if you have a gas or pellet boiler: Low-temperature boilers with abundant condensation require acid-resistant stainless steel (AISI 316L).
Standard Series: Practical Classic
A system for installation tasks in boiler rooms and technical areas. The design of the elements allows you to assemble the starting section of the chimney for gas exhaust.
Key features:
- Welding and connection: Longitudinal TIG weld. Simple "pipe-in-pipe" connection (socket expansion).
- Material: Black steel, 2.0 mm wall thickness.
- Coating: Heat-resistant black paint.
Ferro-Lux Series (Jeremias): Design and Aesthetics
A special series of elements for interiors where the chimney pipe remains visible and is part of the visual design of the room (e.g., when connecting fireplace inserts in living rooms).
Key features:
- Seamless appearance: The use of laser welding and a hidden connection system with narrowing (Plug-and-socket) makes the joints less noticeable.
- Coating: Matte black color (heat-resistant Senotherm 702.284 enamel).
- Assortment: Includes smooth elbows without doors, adjustable bends, and decorative trim rings for finishing.
Technical Specifications and EN 1856-2 Classification
The 2 mm wall thickness ensures resistance to deformation and flue gas exposure. The systems are designed to operate in natural draft mode and are suitable for discharging combustion products from wood and solid fuels.
| Fuel type | Wood and solid fuel |
| Operation mode | Natural draft (N1) |
| Soot fire resistance | Yes (Class G) |
| Condensate resistance | D (For dry conditions) |
| Corrosion resistance | Vm |
| Approvals / Certification | CE 1450 - CPR - 0010 |
| Factory warranty | 2 years |
Full Range of Elements (Black Steel, 2 mm)
In our catalog, you will find all the necessary parts to assemble a chimney starting unit of any configuration:
Straight Pipes and Radiators
Straight pipes: Lengths of 1000, 500, and 250 mm (Standard series and Ferro-Lux).
With damper and door: 1000 mm and 500 mm pipes with a built-in damper and condensate protection.
Radiator pipes: 500 mm long elements with an increased surface area for additional room heating.
Elbows (Bends)
Fixed angles: 90° and 45° elbows (Standard series and Ferro-Lux).
With inspection door: 90° and 45° elbows with a technological door for maintenance and cleaning.
Adjustable: Universal rotary bends 0-90° and 0-45°, including models with two inspection doors.
Adapters, Tees, and Dampers
Draft regulation: Dampers with a short (20 mm) and long (450 mm) handle, throttle valves with a mechanical lock.
Adapters: Reducers (increasing/decreasing diameter), transitions to ceramics and rectangular shafts, 0.8 mm connections.
Accessories: 90° and 45° tees, connection sleeves, nipples, and decorative trim rings.
Installation and Documentation
- Installation scheme for black steel chimneys (PDF)
- CE certificates and declarations of performance (EN 1856-2)
Project Gallery
